Model Number: MD1000
Manufacturer: DELL
Product Condition: Used
PowerVault MD1000 is a 3Gb/s serial attached SCSI (SAS) expansion enclosure that offers seamless capacity expansion for existing PoweVault MD3000 and MD3000i arrays.
- Expand with up to two enclosures behind the PowerVault MD3000 or MD3000i
- Enables mixing SAS and serial ATA (SATA) drives in a single enclosure
- Fifteen 3.5 inch drives in just 3U of rack space
Storage
- Hard Drives
Up to fifteen (15) 1-inch-by-3.5-inch SAS hot-pluggable 3.0 Gbps hard drives, at speeds of 10,000 or 15,000 RPM
Up to fifteen (15) 1-inch-by-3.5-inch SATA II hot-pluggable 3.0 Gbps hard drives, at speeds of 7,200 RPM
Drive speeds and capacities
SAS Drives
15,000 RPM SAS drives available in 73GB, 146GB, 300GB, 450GB and 600GB
10,000 RPM SAS drives available in 300GB, 400GB and 600GB
Nearline SAS (7,200 RPM) drives available in 500GB, 750GB or 1TB
SATA Drives
7,200 RPM SATA II drives available in 250GB, 500GB, 750GBor 1TB<
Energy efficient SATA II (5,400 RPM) drives available in 1TB and 2TB
Maximum Capacity (per enclosure)
Â
30TB using fifteen 2TB5,400 RPM SATA II disk drives in one enclosure
Expansion Capabilities
PERC RAID Controller enables expansion to 6 enclosures
More Details on PERC
PowerVault MD3000 and MD3000i enable expansion to 3 enclosures
Connectivity
- Support for either of the following configurations:
Unified mode (single path) for daisy chaining of up to 6 enclosures per PERC 6/E controller (3 enclosures per port, single path)
Unified mode (redundant path) for daisy chaining up to 3 enclosures per PERC 6/E controller (3 enclosures connected to both ports via redundant path cabling)
Split mode with dual Enclosure Management Modules providing direct connectivity to drives 0 though 6 and a separate connectivity to drives 7 through 14
Chassis
- Height:
13.11 cm (5.16 inches)
Width:
44.63 cm (17.57 inches)
Depth:
48.01 cm (18.9 inches)
Weight:
35.37 kg (78 lb) (maximum configuration)
Power
- Wattage:
488 W maximum continuous; 550 W peak
Heat dissipation:
200 W
Voltage:
100-240 V rated (actual 90-264 V)
Frequency:
47-63 Hz
Amperage:
7.2 A at 100 V, 3.6 A at 200 V
Available Hard Drive Power (per slot):
Supported consumption
Up to 1.3 A at +12 V; Up to 1.5 A at +5 V
Management
- Enclosure Management Modules (EMM):
1 or 2 modules
A second EMM provides redundant enclosure management capability
Environmental Operating Conditions
- Temperature:
Operating: 10° to 35°C (50° to 95°F)
Storage: -40° to 65°C (-40° to 149°F)
Relative humidity:
Operating: 20% to 80% (non-condensing)
Storage: 5% to 95% (non-condensing)
Altitude:
Operating: -16 to 3048 m (-50 to 10,000 ft)
Storage: -16 to 10,600 m (-50 to 35,000 ft)
BTU per hour:
1430
Lifetime warranty for all rackmount kits and nonelectronic equipment.
90 day warranty on all equipment.
Returns for a refund are accepted for 14 days after the date your item was received, however the buyer is responsible for all shipping costs incurred both ways and this amount will be deducted from the refund amount.