Model Number: NM-4E
Manufacturer: CISCO
Product Condition: Used
The 4-port Ethernet network module offers connections to four Ethernet LANs. One connection is via an Ethernet AUI DB-15 connector or 10BaseT RJ-45 connector. The other 3 connections are via 10BaseT RJ-45 connectors.
Supported Platforms & Minimum IOS Versions:
- 3745 - Not Available
- 3725 - Not Available
- 3660 series - 12.0(5)T
- 3640 - 11.2(6)P
- 3620 - 11.2(6)P
- 2691 - Not Available
- 2650 - 12.1(3)T
- 2600XM Series - 12.1(14) or 12.2(8)T1
- 2600 series - 11.3(4)T
- 1720 - Not Available
- 1600 series - Not Available
| Technical Information |
| Application/Usage |
Data Networking |
| Interfaces/Ports |
| Interfaces/Ports |
4 x Ethernet LAN |
| Interfaces/Ports Details |
3 x RJ-45 10Base-T LAN |
| Interfaces/Ports Details |
1 x DB-15/RJ-45 10Base-T (AUI) LAN |
| Media & Performance |
| Connectivity Media |
Twisted Pair 10Base-T |
| Data Transfer Rate |
10 Mbps Ethernet |
| Controls/Indicators |
| Status Indicators |
- Network module status indicator, status LEDs including send/receive, half/full duplex, and LAN speed indication
|
| Environmental Conditions |
| Temperature |
32°F (0°C) to 104°F (40°C) Operating |
| Temperature |
-13°F (-25°C) to 158°F (70°C) Non-operating |
| Humidity |
5% to 95% Relative Humidity |
| Physical Characteristics |
| Dimensions |
1.55" Height x 7.10" Width x 7.20" Depth |
| Weight (Approximate) |
2 lb Maximum |
| Miscellaneous |
| Additional Information |
- The 4-port Ethernet network module supports up to four Ethernet connections
- Ethernet port 0 uses either the AUI (DB-15) connector on the right side of the module or the 10BaseT (RJ-45) connector next to it, but only one of these two connections can be active at a time
- Ethernet ports 1, 2 and 3 use 10BaseT connectors; these ports do not provide an AUI connector
Modular Router Solutions:
- LAN-to-LAN Routing
- DSL Access
- Dialup Remote Access
- ISDN Concentration
- Serial & Legacy Concentration
- Voice & Fax Integration
Protocols Supported:
- Full Cisco IOS software support by release 11.2
Physical Limitation of Serial Modules per Chassis:
- Cisco 3660: 6
- Cisco 2600 and 2600xm: 1
- Cisco 3640: 3
- Cisco 3620: 2
Comments:
- No reliance on other network modules, WAN interface cards, voice interface cards, or advanced integration modules
|
| System Requirements |
Cisco IOS Software Release Requirements:
- Cisco IOS Release 11.2.(5)P or later
|
Lifetime warranty for all rackmount kits and nonelectronic equipment.
90 day warranty on all equipment.
Returns for a refund are accepted for 14 days after the date your item was received, however the buyer is responsible for all shipping costs incurred both ways and this amount will be deducted from the refund amount.