0 Items
Order Total: $0.00
0 Product
$0.00




Cisco Products arrow Cisco Equipment arrow Network Modules (NM) arrow Cisco Network Module Card 8 X T1 Wan

Cisco Network Module Card 8 X T1 Wan
Part Number: NM-8T1-IMA

Cisco Network Module Card 8 X T1 Wan
$43.00
Out Of Stock
Question? Click Here

Model Number: NM-8T1-IMA
Manufacturer: CISCO
Product Condition:  Used
Ships: Today (Ships same day if ordered before 5:30 PM EST M-F)

Model, Manufacturer, Condition

Model Number: NM-8T1-IMA
Manufacturer: CISCO
Product Condition:  Used

Description

The 8-port T1 ATM Network Module with IMA provides access to ATM WAN up-links at fractional T3 bandwidths. Each link provides 8 ports with up to 12 Mbps connectivity. The T1 version provides an RJ-45 connector with integrated CSU/DSU.

Compatibility

    Network interfaces:
  • Compatible to all existing network modules supported by Cisco 3600 family

    Supported Platforms & Minimum IOS Versions:
  • 3745 - 12.2(8)T
  • 3725 - 12.2(8)T
  • 3660 series - 12.0(5)T
  • 3640 - 12.0(5)T
  • 3620 - 12.0(5)T
  • 2691 - 12.2(8)T1
  • 2650 - 12.1(3)T
  • 2600XM Series - 12.1(14) or 12.2(8)T1
  • 2600 series - 12.0(5)T
  • 1720 - Not Available
  • 1600 series - Not Available

Features

Technical Information
Application/Usage Data Networking
Interfaces/Ports
Interfaces/Ports 8 x T1 WAN
Interfaces/Ports Details 8 x RJ-45 Female T1 ATM WAN
Media & Performance
Connectivity Media 100 ohm Twisted Pair
Data Transfer Rate 1.54 Mbps T1
Management & Protocols
Management This feature supports the following Management Information Base (MIBs):
  • IMA MIB (ATM Forum, AF-PHY-0086.000)
  • DS1/E1 MIB (as defined in RFC 1406)
  • Chassis MIB
Controls/Indicators
Status Indicators
  • AL (Alarm)
  • LP (Loopback)
  • CD (Carrier Detect)
  • EN (Enable LED)
Environmental Conditions
Temperature 32°F (0°C) to 104°F (40°C) Operating
Temperature -13°F (-25°C) to 158°F (70°C) Non-operating
Humidity 5% to 95% Relative Humidity
Physical Characteristics
Dimensions 1.55" Height x 7.10" Width x 7.20" Depth
Weight (Approximate) 2.50 lb Maximum
Miscellaneous
Additional Information Modular Router Solutions:
  • ATM Edge Connectivity
  • Bandwidth Management
  • DCN (Data Communications Network)
  • LAN-to-LAN Routing
  • TDM/Drop&Insert
  • VPN & Firewall Solutions
  • Voice & Fax Integration

    ATM Alarm Signals supported:
  • LoS
  • Loss of frame (LF)
  • Loss of signaling multiframe
  • Loss of CRC multiframe
  • Reception of remote alarm signal
  • Remote multiframe alarm signal
  • Alarm indication signal (AIS)
  • Timeslot 16 AIS

    T1 Interfaces Physical Specifications:
  • Line rate: 1.544 Mbps + 50bps
  • Line code: binary 8-zero substitution (B8ZS) per ANSI T1.408
  • Line framing: extended superframe format (extended superframe (ESF) 24-frame multiframe) per ANSI T1.408
  • Input jitter tolerance: per ATT TR 62411
  • Output jitter generation: per ATT TR62411 using normal mode sync
  • Physical layer alarms: Loss of signal (LoS), out of frame (OF), alarm indication signal (AIS) remote deflect identification (RDI)

    Bandwidths Supported:
  • From 1.544 to 12.352 Mbps, in 1.544 Mbps increments

    Protocols supported:
  • Full Cisco IOS software as of 12.0(5)T

    Comments:
  • Maximum of one per Cisco 2600 and 3620
  • Maximum of three per Cisco 3640
System Requirements
  • Requires an IOS "PLUS" feature set
  • No reliance on other network modules

Warranty:

Lifetime warranty for all rackmount kits and nonelectronic equipment.
90 day warranty on all equipment.

Return Policy:

Returns for a refund are accepted for 14 days after the date your item was received, however the buyer is responsible for all shipping costs incurred both ways and this amount will be deducted from the refund amount.


Shipping | Privacy Policy | Warranty / Returns | Testimonials | Site Map

Copyright © 2011 Gulfstream Data, LLC.
All Rights Reserved.