Model Number: NM-2FE2W
Manufacturer: CISCO
Product Condition: Used
This mixed-media network module has two full/half duplex, auto-sensing 10/100 Ethernet port and 2 WAN Interface Card (WIC) expansion slots, supporting all current WICs and VWICs. The 10/100 Ethernet connections are via RJ-45 connectors.
Supported Platforms & Minimum IOS Versions:
- 3745 - 12.2(8)T
- 3725 - 12.2(8)T
- 3660 series - 12.0(7)XK
- 3640 - 12.0(7)XK
- 3620 - 12.0(7)XK
- 2691 - 12.2(8)T1
- 2650 - Not Available
- 2600XM Series - Not Available
- 2600 series - Not Available
- 1720 - Not Available
- 1600 series - Not Available
Network interfaces:
- Compatible with all existing network modules and WICs supported by Cisco 2600/3600 family
Not supported:
- WIC36-1B-S/T
- WIC36-1B-U
- WIC-1B-S/T-LL
- WIC-1ENET
Technical Information |
Application/Usage |
Data Networking |
Interfaces/Ports |
Interfaces/Ports |
2 x 10/100Base-TX LAN |
Interfaces/Ports Details |
2 x RJ-45 10/100Base-TX Auto-sensing LAN |
Media & Performance |
Connectivity Media |
Twisted Pair 10/100Base-TX |
Data Transfer Rate |
10 Mbps Ethernet Half/Full-duplex |
Data Transfer Rate |
100 Mbps Fast Ethernet Half/Full-duplex |
I/O Expansions |
Expansion Slots |
2 x WIC/VWIC |
Controls/Indicators |
Status Indicators |
- Ethernet 10/100 Speed Indication
- Link and full Duplex LEDS
|
Reliability |
MTBF |
569302 Hour |
Power Description |
Power Consumption |
15 W Maximum @ |
Environmental Conditions |
Temperature |
32°F (0°C) to 104°F (40°C) Operating |
Temperature |
-13°F (-25°C) to 158°F (70°C) Non-operating |
Humidity |
5% to 95% Relative Humidity |
Physical Characteristics |
Dimensions |
1.55" Height x 7.10" Width x 7.20" Depth |
Weight (Approximate) |
2.50 lb Maximum |
Miscellaneous |
Additional Information |
Modular Router Solutions:
- LAN-to-LAN Routing
- VPN & Firewall Solutions
- DSL Access
- Dialup Remote Access
- ISDN Concentration
- Serial & Legacy Concentration
The Maximum Number of NMs that can be utilized in each of the 2600/3600 families is as follows:
- 2691: 1
- 3620: 2
- 3640: 4
- 3660: 6
- 3725: 2
- 3745: 4
Protocols supported:
- Full Cisco IOS software as of 12.0(7)XK
WIC Performance:
- Up to 8Mb/s per WIC (with just 1 WIC installed)
- Uses the same Fast Ethernet controller as all other Cisco 2600/3600 Fast Ethernet ports
- WICs are not hot swappable. The network modules support hot swap in the Cisco 3660.
- Supports a maximum of two channel groups per VWIC
- Does not support ISDN PRI
- Does not support Fast EtherChannel
Comments:
- No reliance on other network modules, WAN interface cards, voice interface cards, or advanced integration modules. Will only operate in 3600 series routers.
|
System Requirements |
- The minimum level of IOS is IOS 12.0(7)XK or 12.1(1)T
|
Lifetime warranty for all rackmount kits and nonelectronic equipment.
90 day warranty on all equipment.
Returns for a refund are accepted for 14 days after the date your item was received, however the buyer is responsible for all shipping costs incurred both ways and this amount will be deducted from the refund amount.